Headsets

Loose ball headset bearing retainers. - Grade 300 bearings

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 22 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Refresh your ride. Genuine replacement parts The right parts for the right bike. - Durable steel construction - Great low-cost replacement option

Genuine replacement parts Keep your bike operating as it should. - Fits 1" threaded steerers for use with 1-1/8" headtubes - Cage ball bearings

Get back on the bike with a genuine replacement headset. Original replacement headset for your bike. PRODUCT DETAILS - Confirm compatibility before use - Includes reducer, bearings, cling ring, gasket and dust cover

Get back on the trail with a replacement headset assembly for your Session. Original replacement headset assembly for your Session. PRODUCT DETAILS - Complete headset assembly - Degree offset headset is stock on Session models - Only for use on 2018+ Session Carbon models

Trek proprietary headset components are compatible with Trek Knock Block models. Service and replacement parts specifically for Trek Knock Block Technology. PRODUCT DETAILS - Compatible with all Trek Knock Block models - Includes crown race, bearings, top cover, frame chip & fastener - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included

Service and replacement parts specifically for Trek Knock Block technology. Genuine replacement parts Get your bike back on the trail with the headset parts you need. - Trek proprietary headset components compatible with Trek Knock Block models - 58-degree headset fits all 2017-2020 Knock Block equipped models - Includes crown race, bearings, top cover, frame chip & fastener - Frame chip has display tabs to connect Bosch Kiox Mount sold separately - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included

Service and replacement parts specifically for Trek Knock Block technology. Get your bike back on the trail with the headset parts you need. PRODUCT DETAILS - Trek proprietary headset components compatible with Trek Knock Block models - 62-degree headset fits 2020 & 2021 Supercaliber and 2021 Procaliber - Includes crown race, bearings, top cover, frame chip & fastener - Frame chip has display tabs to connect Bosch Kiox Mount sold separately - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included

- Steel cups - Steel retainer bearings - Available in chrome or black - Steerer Dia: 25.4mm - Cup Dia: 30mm

- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC32/25.4-24tpi|EC32/27 - Steerer Dia: 25.4mm - Cup Dia: 32.5mm

The Sunday BMX integrated headset is designed to be a quality headset at an affordable price. - Laser-etched Sunday logo - Color-matching spacers included - Gyro compatible - High quality sealed bearings and precision tapered wedge help to keep the headset tight

The Revolver headset features a high precision CNC 6061 Aluminum bearing cover with triple rubber seals for a perfect fit. - Campy spec 45x45 sealed bearings - 15mm dust cover stack height - 2.7oz (76.54g) - Materials: Aluminum Cover, Chromoly Crown Race

- Fork crown race for genuine Ritchey headsets - Alloy with 45-degree taper

A key component of the new Ritchey Switch System, Ritchey's newest headset upper is designed to specifically work with the Ritchey Switch Stem to route cables, wires and hydraulic lines from the handlebar through to the bicycle frame. Cables are routed from the handlebar into the headset conduit, which sits on the underside of the Switch Stem and then travel through an opening on the front of the Switch headset spacers before passing through two channels on the top of the headset and into the frame. This system allows headset bearings to perform without any interference from cables, wires, or lines passing through the headtube.

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3 or 15.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Lower Fit (S.H.I.S.): IS42/30 - Upper Bearing OD: 41.8 - Lower Bearing OD: 46/42 - Top Cover OD: 46 - Bearings: Sealed cartridge - Weight: 74g

A key component of the new Ritchey Switch System, Ritchey's newest headset upper is designed to specifically work with the Ritchey Switch Stem to route cables, wires and hydraulic lines from the handlebar through to the bicycle frame. Cables are routed from the handlebar into the headset conduit, which sits on the underside of the Switch Stem and then travel through an opening on the front of the Switch headset spacers before passing through two channels on the top of the headset and into the frame. This system allows headset bearings to perform without any interference from cables, wires, or lines passing through the headtube.

A key component of the new Ritchey Switch System, Ritchey's newest headset upper is designed to specifically work with the Ritchey Switch Stem to route cables, wires and hydraulic lines from the handlebar through to the bicycle frame. Cables are routed from the handlebar into the headset conduit, which sits on the underside of the Switch Stem and then travel through an opening on the front of the Switch headset spacers before passing through two channels on the top of the headset and into the frame. This system allows headset bearings to perform without any interference from cables, wires, or lines passing through the headtube.

The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion. - Bearing: Semi cartridge - Material: Steel - Stack Height: 30.2mm

Comp Logic Threadless Headset - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion

Ritchey Comp Threaded Headset.

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features semi-cartridge high-quality bearings. - Material: Steel - Top Cover OD: 46mm - Bearings: Semi-cartridge - Weight: 74-83g

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This carbon fiber beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Upper Bearing OD: 41.8 - Top Cover OD: 46mm - Bearing: Sealed cartridge, Ti-coated - Weight: 36g

Bringing Ritchey's heritage of legendary cycling products into the world of e-bikes and electronic shifting, Tom Ritchey designed a unique headset that allows the cables to be run internally from the stem into standard frames without requiring the frame or fork to be modified. The Logic-E headset is designed to allow Shimano Di2 and STEPS cables to be concealed from view and the wind while protecting them from damage. - Steerer size: 1-1/8" upper - Drop-in (IS) or Press-Fit (S) - Weight: 35-44g

Drop in lower assembly with crown race. - 45/45 degree angular contact bearing - Titanium coated for corrosion resistance

The WCS Logic Threadless Headset the reliable workhorse of the Ritchey threadless headset range. This smooth and reliable specimen features lightweight, precision-machined aluminum cups, sealed cartridge 45/45-degree hybrid ceramic bearings with a titanium coating, and comes packed with Ritchey Grease and a sealed design that promises minimal penetration from the elements. - Bearing: Sealed cartridge (ACB) - Ti coated - Material: Alloy - Stack Height: 28.3mm

Converts quill style forks to use threadless stems.

Lightweight aluminum alloy - Non-Keyed - Height: 20mm - 10 to a bag

Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 10mm, 3mm and 2mm (15mm total) - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1-1/8 integrated headset. - 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).