Skip to main content

SAVE 20% ON ALL TREK RAIL E-MTBS IN STOCK WHILE SUPPLIES LAST!

Filter By:

  • Show More Brands

  • Show Fewer Brands

650B

DT Swiss E 1900 SPLINE 30 27.5-inch Rear
$265.90 - $303.90
Nowadays, bikers ride what used to be called downhill trails on enduro bikes. The trails are getting rougher, and the demands on the gear and rider are greater. The E 1900 SPLINE has been developed to deal with precisely these requirements. With its stiff aluminum rim, lightweight straight-pull spokes, and proven DT Swiss hubs, this wheel is well-prepared for any challenge. The balance of weight and stiffness will put a smile on your face whether you're riding uphill or downhill. After all, most of the best trails don't offer lift service.
Bontrager Line Comp 30 TLR Boost MTB 27.5-inch Front
$174.99
Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance. - Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum - Updated rim design and stronger G609 alloy stands up to hard hits - Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system - Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel - Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear - 14G spokes with brass locking nipples - 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately - Includes TLR rim strip installed and TLR valve
Bontrager Line Comp 30 TLR Boost MTB 27.5-inch Rear
$224.99
Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance. - Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum - Updated rim design and stronger G609 alloy stands up to hard hits - Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system - Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel - Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear - 14G spokes with brass locking nipples - 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately - Includes TLR rim strip installed and TLR valve
Bontrager Line Comp 40 TLR Boost 27.5-inch Rear
$209.99
A wide rim profile supports tires for unmatched traction and cornering. Product details - Original equipment replacement Bontrager Line Comp 40 TLR wheels - Tubeless Ready (TLR) rims allow for quick transition to tubeless system upgrade - Extra wide alloy rim (44mm outer, 40mm inner width) is perfect for Plus tires - Shimano 10/11 speed, Micro Spline and SRAM XD driver available separately - Does not include skewer, reflector, rim strip, valve, or owner's manual
Bontrager Line Elite 30 TLR Boost 27.5 MTB Front
$479.99
A strong, durable, OCLV Carbon MTB wheel with best-in-class impact strength, durability, and resistance to pinch flats. Warrantied for life This durable carbon mountain bike wheelset keeps the good times rolling. It delivers performance on any trail and durability against any rocks you can't avoid. Line Elite 30's robust rim profile delivers best-in-class strength and durability and resists pinch flats. Plus, simple tubeless setup makes it easy to run lower pressure for more confidence and a smoother, faster ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - OCLV carbon offers an optimized blend of weight, strength, and durability - Rim profile and hook bead design adds impact strength and helps prevent pinch flats - Rapid Drive 108 hub with 3.3 degrees of engagement for quick, confident energy transfer - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148, 28 front/rear Grand Forza 14/15G spokes with Alloy hex nipples - 29mm internal, 38mm external width, 28 hole front/rear - 6 bolt disc, SRAM XD: Shimano 10/11 and MicroSpline driver available separately - Warrantied for life, no rider weight limit
Bontrager Line Elite 30 TLR Boost 27.5 Rear Wheel
$519.99
A strong, durable, OCLV Carbon MTB wheel with best-in-class impact strength, durability, and resistance to pinch flats. Warrantied for life This durable carbon mountain bike wheelset keeps the good times rolling. It delivers performance on any trail and durability against any rocks you can't avoid. Line Elite 30's robust rim profile delivers best-in-class strength and durability and resists pinch flats. Plus, simple tubeless setup makes it easy to run lower pressure for more confidence and a smoother, faster ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - OCLV carbon offers an optimized blend of weight, strength, and durability - Rim profile and hook bead design adds impact strength and helps prevent pinch flats - Rapid Drive 108 hub with 3.3 degrees of engagement for quick, confident energy transfer - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148, 28 front/rear Grand Forza 14/15G spokes with Alloy hex nipples - 29mm internal, 38mm external width, 28 hole front/rear - 6 bolt disc, SRAM XD: Shimano 10/11 and MicroSpline driver available separately - Warrantied for life, no rider weight limit
Bontrager Line Pro 30 TLR Boost 27.5 MTB Front
$679.99
A light, durable, OCLV Carbon MTB wheel with best-in-class impact strength, durability, and resistance to pinch flats. Good things last A lightweight carbon mountain bike wheelset ready to tackle any trail and stand up to that rock you just didn't see. Line Pro 30 features best-in-class strength and durability and even helps prevent pinch flats. Plus, simple tubeless setup makes it easy to unlock their full potential and run lower pressure for more confidence and a smoother, faster ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - Ultra-durable OCLV Pro carbon provides a lighter layup for the ultimate in lightweight strength - Rim profile and hook bead design adds impact strength and helps prevent pinch flats - Rapid Drive 108 hub with 3.3 degrees of engagement for quick, confident energy transfer - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148, 28 front/rear DT Swiss Competition Race 14/17G spokes with Alpina alloy locking nipples - 29mm internal, 38mm external width, 28 hole front/rear - 6 bolt disc, SRAM XD: Shimano 10/11 and MicroSpline driver available separately - Warrantied for life, no rider weight limit
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 650b Rear
$1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
WTB Proterra Light i25 650B Front
$324.95
Proterra Light i25 wheels care for all your Road Plus adventure riders out there. The extra traction and comfort of a high-volume 650B tire is pretty nice, eh? Proterra Light i25 wheels feature an open-cavity profile to minimize weight and maximize efficiency as you get lost on backroad detours. Like all other Proterra wheels, the responsive 6-pawl freehub offers 3.7 degrees of reliable engagement, whether you're cruising to work or have your frame bag bursting at the seams for an overnight adventure. Designed for Road Plus, because more volume is always more fun. - 25mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Top-tier EZO sealed bearings - Center Lock rotor mounts
WTB Proterra Light i25 650B Rear
$389.95
Proterra Light i25 wheels care for all your Road Plus adventure riders out there. The extra traction and comfort of a high-volume 650B tire is pretty nice, eh? Proterra Light i25 wheels feature an open-cavity profile to minimize weight and maximize efficiency as you get lost on backroad detours. Like all other Proterra wheels, the responsive 6-pawl freehub offers 3.7 degrees of reliable engagement, whether you're cruising to work or have your frame bag bursting at the seams for an overnight adventure. Designed for Road Plus, because more volume is always more fun. - 25mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Top-tier EZO sealed bearings - Center Lock rotor mounts
WTB Proterra Tough i30 27.5-inch Front
$324.95
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings
WTB Proterra Tough i30 27.5-inch Rear
$389.95
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings
Stan's NoTubes Arch MK4 27.5-inch Front Wheel
$308.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Stan's NoTubes Arch MK4 27.5-inch Rear Wheel
$657.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Stan's NoTubes Arch MK4 Rear
$657.00
The Arch MK4 is the wheelset a lot of us here at Stan's choose to ride. All-mountain, Downcountry, Trailduro—whatever they're calling it this week, when you like pushing your limits on climbs, descents, and every kind of trail, this is your wheelset. The Arch MK4's 28mm internal width and patented lightweight, low-profile design is not afraid to climb, while being an absolute monster on the descents. With a welded seam, reinforced spoke bed, and durable 6069 aluminum construction, the Arch MK4 rims give you the confidence to ride everything. When it comes to a consistent and reliable airtight tubeless seal, nothing beats Stan's patented Bead Socket Technology. The Arch MK4 rims feature an asymmetric design with offset spoke holes to improve spoke angle and create a stronger all-around wheel. Unlike most asymmetric rims that suffer from difficult inflation and poor tubeless performance, Stan's BST-Asymmetric design delivers all the advantages of a stronger wheel, with no compromises in tubeless performance. Nobody likes downtime, so the Arch MK4 wheelset is built with traditional J-bend spokes based on their proven strength, ride quality, and easy serviceability. Stan's has always made it easy to find replacement spokes should you ever damage your wheel, and now we've made it even easier. MK4 front and rear wheels of the same diameter all use the exact same very common spoke length, both sides, front and rear. Serviceability doesn't get any easier than that. From the first click of the incredible M-pulse hubs, it's clear that confidence is the philosophy behind every part of this wheelset. Designed and CNC machined by Project321 in Bend, Oregon, M-pulse freehubs feature 6 pawls with Neodymium magnets that lock into place with greater force than conventional pawl springs, but offer virtually no resistance when coasting. Multiple teeth on each pawl offer better load distribution for years of trouble-free riding, and the angle of the pawls was engineered to transfer stress away from the rotating bearings, decreasing stress and wear on the entire freehub. That durability extends to the 17mm axles machined of 7075 aluminum and the full complement of Enduro brand bearings, including a double-row freehub bearing. M-pulse internals are also fully shielded inside the hub, because the only thing better than a good bearing seal is a good bearing seal most dirt can't even reach. As durable as they are, these hubs are also built for speed. M-pulse hubs engage with only 1.66°of rotation, putting down power nearly instantaneously, but how smooth these hubs roll is what really stands out. Adjustable preload allows you to fine tune M-pulse hubs for reduced friction, and less drag means more speed on the ground.The result is a bombproof hub with quick, consistent engagement and less resistance for more speed. Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations. Tubeless ready with rim tape installed. The Arch MK4 is our most versatile wheelset, and the best aluminum wheelset available for riders who want to push limits on every trail. Up, down, and wherever the ride takes you, the Arch MK4 wheelset has it under control. - Arch MK4 wheels include pre-installed tape for tubeless use and presta valves. - Versatile 28mm internal rim width optimized for 2.2-2.5” tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed - BST-Asymmetric design combines Stan’s legendary easy tubeless inflation with a stronger, more balanced wheel build - M-pulse ultra-low drag magnetic pawl adjustable hubs with 1.66° engagement - Enduro bearings with double-row freehub bearing - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - Connection program includes 5-year hub warranty, 3-year rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice
Stan's NoTubes Crest MK4 27.5-inch Front Wheel
$308.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Stan's NoTubes Crest MK4 27.5-inch Rear Wheel
$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Stan's NoTubes Flow EX3 27.5-inch Rear Wheel
$475.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall
Stan's NoTubes Flow MK4 27.5-inch Front Wheel
$308.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.
Stan's NoTubes Flow MK4 27.5-inch Rear Wheel
$657.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.
Stan's No Tubes Flow EX3 27.5-inch Front Wheel
$345.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs
Spank 350 Vibrocore 27.5-inch Rear
$479.99
Spank 350 Vibrocore rear wheels are laced to the brand new SPANK HEX Drive Hub, with 102T 6-pawl ratchet offering 3.5 degrees of engagement - that's literally almost instant pick-up. The low profile, radially compliant alloy rim injected with SPANK's award-winning Vibrocore to add torsional strength and lateral stiffness, offers a smooth and highly responsive ride feel. Hand-built to A-Class specifications, the 350 Vibrocore wheels with SPANK Hex Drive hub is the premium offer from the SPANK wheelhouse, and is trusted by pros on the UCI DH World Cup and Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - Vibrocore inner well reduces the transmission of harmful vibration frequencies & increases the fatigue life of the rim - 30mm internal width is versatile fitting tires from 2" to 2.6" and allows plus size tire use without negative squaring off of tire profiles
Spank 350 Vibrocore J-Bend 27.5-inch Front
$349.99
The low-profile, radially compliant alloy rim injected with SPANK's award-winning Vibrocore to add torsional strength and lateral stiffness offers a smooth and highly responsive ride feel. Hand-built to A-Class specifications, the 350 Vibrocore wheels with SPANK Hex Drive hub is the premium offer from the SPANK wheelhouse and is trusted by pros on the UCI DH World Cup and Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness - Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - Vibrocore inner well reduces the transmission of harmful vibration frequencies & increases the fatigue life of the rim - 30mm internal width is versatile, fitting tires from 2" to 2.6" and allows plus-size tire use without negative squaring off of tire profiles
Spank 359 J-Bend 27.5-inch Front
$319.99
Hand-built to A-Class specifications, the 359 wheel with SPANK Hex Drive hub is the premium lightweight performance offer from the SPANK wheelhouse and is trusted by pros on the Enduro World Series circuit. - Moderately low 19mm profile height and wide width balances the benefits of radial compliance with high lateral stiffness and predictable handling - Radial Compliance improves traction over bumps and chatter while reducing negative feedback to the rider. Performance and comfort are improved - 30.5mm inner width is extremely versatile, fitting tires from 2.0" to 2.6", and even allowing + size tire use without negative squaring off of tire profiles - Bead Bite tubeless hooks enhance tubeless performance and tire security, even at lower pressures
Spank SPIKE 33 27.5-inch Rear
$379.99
- A high-performance alloy rim designed for freeride, enduro and downhill race use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction - The corrugated rim center adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable
Spank Spike Race 33 27.5-inch Front
$269.99
- A high-performance alloy rim designed for freeride, enduro, and downhill race use - Tubeless-ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction - The corrugated rim center adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shot-peened finish to increase fatigue life and make it more durable
Race Face Next R 27.5-inch Front Wheel
$799.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Race Face Next R 27.5-inch Rear Wheel
$849.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Race Face Next R Rear
$849.99
All Mountain riding is all about progression going bigger, steeper, faster. And in that spirit, the Next R carbon wheelset will be your trusted partner in progression. Dialed-in technology + design adds confidence and strength to your MTB game. - Big time strength and lightweight durability are all part of the Next R charm. A UD rim layup with a 31mm inner width helps it handle all with style - Offset spoke nipples laced with uniform double-butted straight pull spokes achieve ideal wheel stiffness. Spare spokes included - With ultra-fast 3-degree engagement, the Vault hub keeps your world spinning
Race Face Turbine 27.5-inch Rear Wheel
$499.99
Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride. R is for rally. HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
Page 1 of 3 Next page